We use cookies to ensure that we give you the best experience on our website.

3 Wheels RC Body Style 2 Build Guide

Table of Contents

This is the build guide for the 3 Wheels RC body style 2.

Join our Facebook group #

Best way to get help is to join our Facebook Group where you can ask your questions and share your realizations.

Bill of Materials #

The BOM is available here

Fixes #

In this sections, will be listed the available fixes that are not included in the zip archives you may have downloaded.

There is no current fixes for this project.

Printer Calibration #

It is imperative that your printer is well calibrated. The bearing should be a press fit and removed just by pushing on it. It should not drop out or require undue force to install in the calibration part. You should calibrate your printer for every roll of filament, even for the same brand and color. If you need help to calibrate your printer see this resource: “Teaching Tech 3D Printer Calibration”

Cockpit #
Middle assembly #

I recommend you install the square nuts and the screw, then apply a drop of hot glue to prevent the nut to move around. Once dry, remove the screws and keep them for a later step.

Bumper and rear wing #

You can choose between 3 front wind sizes and 2 rear wing size.

Connecting all body parts together #
Bumper assembly #
Body installation on platform #

The cockpit is only slipped in place. No screws. Be careful, the headrest of the seat is tinny and fragile.

Support #

If you like my builds, please consider buying me a coffee, it encourages me to continue making quality designs. Click on the coffee cup on the right bottom corner or visit the Show Your Support Page. Thank you, it is truly appreciated!

What are your Feelings