We use cookies to ensure that we give you the best experience on our website.

BOM 3 Wheels RC Platform

Table of Contents

Here’s a current list of material for the 3 Wheels RC Platform. Check also the BOM’s for the body style you want to print. The links may be outdated, if you find something better, feel free to contact me.

Remember, these are expensive projects. If you own noting listed below it could cost you over 300$

I have not tested every item in these links, so I cannot assure they will work . I have listed some links to provide alternatives for people in different part of the world.

The link with an * asterisk is the one I bought.

Depending on what you own or buy, you may need converters and/or extensions to connect everything together. You will have to figure this out by yourself.

Qty Item Description Links
3 M2.5-10mm
  • Socket Head
  • *Buy Local*
  • Amazon
  • Aliexpress
30 M3-10mm
  • Button Head
  • *Buy Local you can get a box of 100 for around 12$*
  • Amazon
  • Aliexpress
42 M3-16mm
  • Button Head
  • *Buy Local you can get a box of 100 for around 12$*
  • Amazon
  • Aliexpress
10 M3-20mm
  • Socket Head
  • *Buy Local*
  • Amazon
  • Aliexpress
1 M5-16mm
  • Button Head
  • *Buy Local*
  • Amazon
  • Aliexpress
52 M3 square nut
  • 5.4mmx5.4mm 2.3mm thick
  • *Buy Local*
  • Amazon
  • Aliexpress
25 M3 lock nut
  • 5.5mmx5.5mm 4mm thick
  • *Buy Local*
  • Amazon
  • Aliexpress
4 Bearing
  • 10-15-4mm
9 Bearing
  • 5-10-4mm
1 Brushless motor
  • 3530 form factor
  • 1400KV. different value will influence overall speed.
  • The brackets will only fit this type of motors due to mounting screw holes in the front and the back of the motor
1 GT2 Belt
  • 300 mm
16 Ball joint
  • Get a set of Traxxas 1942 Rod End Set
1 3mm Threaded rod
  • OPTIONAL, you can use them with the rod end above to make your own steering link
  • 3mm diameter 150mm long
  • You will need to cut it to length (53mm)
4 Shock absorber
  • 98 Total Length
  • 90mm Center hole to Center hole
  • 17mm wide
3 Tires
  • 2x Front tires 85mmx34mm
  • 1x Rear tire 85mmx42mm
  • If you buy from the link, you will discard the rims
1 Brushless ESC
  • Quicrun WP-16BL30
  • if you use something else, make sure it is the smae size as the 16BL30 otherwise it will not fit inside.
  • If you use a larger one, you may tape it to the rear floor.
1 Lipo 2S Battery
  • You may need to buy adapters to connect the battery to the ESC
1 Steering Servo
  • Anyone the same size should work
1 Transmitter / Receiver
  • 3 Channel minimum
  • Any transmitter / receiver should work fine

Support #

If you like my builds, please consider buying me a coffee, it encourages me to continue making quality designs. Click on the coffee cup on the right bottom corner or visit the Show Your Support Page. Thank you, it is truly appreciated!