The T&A: Ferrari/Vanwall can be build in two different version:
- The Retro Racer.
- The Super Sport. (updated to modern specs)

This is an expensive project. Depending on what you already own it can cost a lot.
You will need a printer with a bed that can print 220mm on X or Y axis.
Here’s a current list of material for the T&A Vintage Racing cars. The links may be outdated, if you find something better, feel free to contact me.
The link with an * asterisk is the one I bought.
Qty | Item | Description | Links |
---|---|---|---|
1 | Tamiya TT-02 Chassis![]() |
This kit will provide critical donor parts. We will use the motor, esc, screws, differentials, gears, suspension and direction parts of the kit. You can buy any TT-02 Chassis, the shell body is not important I sold my Lexan body for 40$. Check to see that the ESC is included otherwise you will need to buy one separately. You can also buy a Starter TT-02 kit if you can find them |
|
1 | TT02 Bearing Kit![]() |
This kit comes with 16 bearings. This is optional but highly recommended. |
|
1 | Tamiya 4200 mAh Battery![]() |
|
|
4 | Metal Drive Shaft![]() |
|
|
2 | Aluminium Front steering![]() |
|
|
4 | Tamiya 53056 Wheel adapter![]() |
|
|
1 | Traxxas Rod End set![]() |
|
|
1 | 3mm Threaded rod![]() |
|
|
1 | 2mm metal rod![]() |
|
|
1 | Steering Servo![]() |
|
|
1 | Transmitter / Receiver![]() |
|
|
0.5kg | Ninjatek Ninjaflex 85A TPU![]() |
|
|
0.5kg | Ninjatek Armadillo 70D TPU![]() |
|
|
1kg | Your Filament of Choice |
|
|
6 | M2-6mm ![]() |
|
|
2 | M3-6mm ![]() |
|
|
32 | M3-10mm ![]() |
|
|
2 | M3-12mm ![]() |
|
|
2 | M3-20mm ![]() |
|
|
4 | M4-10mm Barrel nut![]() |
|
|
8 | M3 Locknut ![]() |
|
|
4 | M4 Locknut ![]() |
|
|