I use Prusaslicer. If you use something else, you will need to adapt your settings.
Check my general print settings here
In the table bellow you will find my printing settings for each part.
“Print Profile” list my settings for each part providing the layer height, the infill and the number of perimeter. For example .2mm 20% 2p means
- .2mm = Layer Height
- 20% = infill
- 2p = numbers of perimeter
“Filament g” is the total filament required in grams
“Support g” is the total filament wasted in supports in grams
“Time” is as you guessed it the time my slicer thinks it will take
“Support” is the support configuration I use
Orientation. I provide the files in what I believe is the best printing orientation. Feel free to experiment better ways to print these parts. Feel free to share your settings in our Facebook group.
Paul Viscovich has provided some general guidelines regarding slicing in Cura and using an Ender 3 V2.
Use Dynamic Quality 0.16mm profile. This will provide the best results in a reasonable print time.
Use brim on parts like roof, doors, hood, trunk…
Tree support can save time and material until they fail and they do fail more frequently.
P9RC Filament usage | |||||
Total | 2303,36 | 597,09 | 195:24:00 | ||
Part | Print profile | Filament g | Support g | Time | Support choice |
_calibration | .2mm 20% 2p | 1,86 | 0,00 | 0:10 | None |
c_2x Front Wheel 5 Spokes | .2mm 20% 2p | 51,44 | 0,44 | 4:22 | Build plate only |
c_2x Front wheel spacer | .2mm 20% 2p | 0,45 | 0,00 | 0:04 | None |
c_2x Steering Link 79.5mm | .2mm 50% 5p | 5,63 | 0,00 | 0:30 | None |
c_12x cone | .2mm 20% 2p | 1,90 | 0,00 | 0:17 | None |
c_front floor reinforcement | .2mm 50% 5p | 35,44 | 0,00 | 1:58 | None |
c_front floor | .2mm 50% 5p | 42,81 | 0,00 | 2:43 | None |
c_front knuckle left | .2mm 50% 5p | 5,22 | 0,14 | 0:34 | Build plate only |
c_front knuckle right | .2mm 50% 5p | 5,22 | 0,14 | 0:34 | Build plate only |
c_middle cover | .2mm 20% 2p | 43,88 | 0,00 | 1:57 | None |
c_middle floor | .2mm 20% 2p | 160,56 | 16,59 | 11:18 | Build plate only |
c_servo mount back traverse | .2mm 20% 2p | 4,75 | 0,00 | 0:27 | None |
c_servo mount front traverse | .2mm 20% 2p | 1,39 | 0,00 | 0:09 | None |
c_Servo mount left | .2mm 50% 5p | 37,44 | 0,30 | 2:49 | Build plate only |
c_Servo mount right | .2mm 50% 5p | 37,44 | 0,30 | 2:49 | Build plate only |
c_servolink | .2mm 50% 5p | 1,49 | 0,00 | 0:10 | None |
c_wishbone lower left MC | .2mm 50% 5p | 7,12 | 0,14 | 0:44 | Everywhere |
c_wishbone lower right MC | .2mm 50% 5p | 7,12 | 0,14 | 0:44 | Everywhere |
c_wishbone upper left | .2mm 50% 5p | 4,89 | 0,00 | 0:24 | None |
c_wishbone upper right | .2mm 50% 5p | 4,89 | 0,00 | 0:24 | None |
p_2x rear drive shaft inner | .2mm 50% 5p | 5,29 | 0,26 | 0:40 | Build plate only |
p_2x rear drive shaft outer | .2mm 50% 5p | 7,09 | 0,90 | 0:51 | Build plate only |
p_2x rear Knuckle | .2mm 50% 5p | 11,71 | 0,28 | 1:14 | Build plate only |
p_2x Rear Wheel 5 Spokes | .2mm 20% 2p | 59,95 | 0,44 | 5:00 | Build plate only |
p_2x Rear Wheel Spcaer | .2mm 20% 2p | 0,29 | 0,00 | 0:04 | None |
p_2x Rear Wheel axle | .2mm 50% 5p | 8,56 | 0,18 | 0:50 | Build plate only |
p_2x Rear Wishbone Upper | .2mm 50% 5p | 8,49 | 0,00 | 0:42 | None |
p_2x Yoke | .2mm 50% 5p | 5,84 | 0,32 | 0:49 | Build plate only |
p_4x Cubic Universal Joint | .2mm 50% 5p | 2,57 | 0,00 | 0:28 | None |
p_4x small cones | .2mm 50% 5p | 0,47 | 0,00 | 0:05 | None |
p_ Center Drive Shaft | .2mm 50% 5p | 3,76 | 0,00 | 0:19 | None |
p_Flange 1 | .2mm 50% 5p | 5,95 | 0,00 | 0:25 | None |
p_Flange 2 | .2mm 50% 5p | 6,07 | 0,00 | 0:26 | None |
p_Gear 72T | .2mm 50% 5p | 11,06 | 0,00 | 0:55 | None |
p_Motor Bearing Bracket | .2mm 50% 5p | 15,98 | 0,00 | 0:56 | None |
p_Motor Bracket | .2mm 50% 5p | 22,41 | 0,00 | 1:28 | None |
p_Pinion gear GT2 20T | .2mm 50% 5p | 3,33 | 0,06 | 0:31 | Build plate only |
p_Rear center gear support left | .2mm 50% 5p | 36,52 | 0,06 | 2:41 | Build plate only |
p_Rear center gear support tight | .2mm 50% 5p | 36,52 | 0,06 | 2:41 | Build plate only |
p_Rear floor reinforcement | .2mm 50% 5p | 51,81 | 0,00 | 2:38 | None |
p_Rear floor reinforcement | .2mm 50% 5p | 68,19 | 0,00 | 3:51 | None |
p_Rear wishbone left | .2mm 50% 5p | 13,23 | 0,05 | 0:58 | Everywhere |
p_Rear wishbone right | .2mm 50% 5p | 13,23 | 0,05 | 0:58 | Everywhere |
p_Door still left | .2mm 20% 2p | 41,88 | 3,57 | 3:05 | Build plate only |
p_Door still right | .2mm 20% 2p | 41,88 | 3,56 | 3:05 | Build plate only |
p_Front Fender Left | .15mm 20% 2p | 94,5 | 46,41 | 10:46 | Build plate only |
p_Front Fender Right | .15mm 20% 2p | 94,5 | 46,41 | 10:46 | Build plate only |
p_Front Bumper Part 1 | .2mm 20% 2p | 45,76 | 22,55 | 4:07 | Everywhere |
p_Front Bumper Part 2 | .2mm 20% 2p | 32,89 | 11,09 | 3:41 | Everywhere |
p_Front Bumper Part 3 | .2mm 20% 2p | 45,83 | 22,64 | 4:32 | Everywhere |
p_Windshield Frame | .2mm 20% 2p | 70,32 | 40,81 | 7:15 | Build plate only |
p_Rear Fender Left | .2mm 20% 2p | 126,71 | 72,32 | 11:23 | Build plate only |
p_Rear Fender Right | .2mm 20% 2p | 127,09 | 72,45 | 11:25 | Build plate only |
p_Rear Bumper Part 1 | .2mm 20% 2p | 48,78 | 24,94 | 4:55 | Everywhere |
p_Rear Bumper Part 2 | .2mm 20% 2p | 35,51 | 13,54 | 3:54 | Everywhere |
p_Rear Bumper Part 3 | .2mm 20% 2p | 48,90 | 25,04 | 4:56 | Everywhere |
p_Door Left Panel | .2mm 20% 2p | 63,64 | 25,10 | 5:20 | Everywhere |
p_Door Left Window Frame | .15mm 20% 2p | 10,75 | 4,05 | 1:26 | Build plate only |
p_Door Right Window Frame | .15mm 20% 2p | 10,74 | 4,05 | 1:26 | Build plate only |
p_Door right panel | .2mm 20% 2p | 63,61 | 21,84 | 5:19 | Everywhere |
p_Hood | .2mm 20% 2p | 89,81 | 20,27 | 7:21 | Everywhere |
p_Roof Part 1 | .2mm 20% 2p | 47,32 | 3,76 | 3:46 | Everywhere |
p_Roof Part 2 | .2mm 20% 2p | 59,73 | 23,03 | 5:58 | Everywhere |
p_Trunk | .2mm 20% 2p | 45,58 | 20,17 | 4:13 | Everywhere |
p_Back Lights Center | .2mm 20% 2p | 15,81 | 0,00 | 1:09 | None |
p_Back lights left flasher | .2mm 20% 2p | 5,73 | 0,00 | 0:39 | None |
p_Back lights right flasher | .2mm 20% 2p | 5,73 | 0,00 | 0:39 | None |
p_2x Door handle | .2mm 20% 2p | 1,08 | 0,47 | 0:09 | Build plate only |
p_4 bars (all 16 bars) | .2mm 20% 2p | 6,92 | 0,00 | 0:43 | None |
p_Body to platform connector left | .2mm 20% 2p | 33,64 | 2,14 | 2:11 | Everywhere |
p_Body to platform connector right | .2mm 20% 2p | 33,64 | 2,14 | 2:11 | Everywhere |
p_2x Door hinge | .2mm 20% 2p | 6,72 | 0,00 | 0:38 | None |
p_2x Headlight | .2mm 20% 2p | 6,44 | 0,00 | 0:42 | None |
p_2x Headlight Ring | .2mm 20% 2p | 7,42 | 0,74 | 0:36 | Build plate only |
p_Hood up bar | .2mm 20% 2p | 0,45 | 0,00 | 0:05 | None |
p_Mirror left | .2mm 20% 2p | 2,93 | 0,52 | 0:20 | Build plate only |
p_Mirror right | .2mm 20% 2p | 2,93 | 0,52 | 0:20 | Build plate only |
p_Motor vent | .2mm 20% 2p | 24,61 | 6,56 | 1:55 | Build plate only |
p_Pillar left | .2mm 20% 2p | 11,85 | 3,81 | 2:28 | Everywhere |
p_Pillar right | .2mm 20% 2p | 11,86 | 3,81 | 2:27 | Everywhere |
p_Pillar top | .2mm 20% 2p | 5,18 | 0,00 | 0:25 | None |
p_Trunk up bar | .2mm 20% 2p | 0,58 | 0,00 | 0:05 | None |