This is a perfect companion to the Willys MB Radio Controlled or 1/6 scale Display Model
Join our Facebook group #
Best way to get help is to join our Facebook Group where you can ask your questions and share your realizations.
Bill of materials #
The BOM is available here
Versions #
The current version is 20220703
Fixes #
In this sections, will be listed the available fixes that are not included in the zip archives you may have downloaded.
There is no current fixes for this project.
Printer Calibration #
It is imperative that your printer is well calibrated. The bearing should be a press fit and removed just by pushing on it. It should not drop out or require undue force to install in the calibration part.
You should calibrate your printer for every roll of filament, even for the same brand and color. If you need help to calibrate your printer see this resource: “Teaching Tech 3D Printer Calibration”
Here’s my procedure when I open a new roll of filament.
Gluing small parts #
Printed parts required in this step
- 11x hook
- 4x Reflector contour
- 4x Reflector
- End Wall Back
- End Wall Front
- Side wall part 1
- Side wall part 2
- Side wall part 3
- Side wall part 4
Frame #
Printed parts required in this step
- Frame back
- Frame Crossmember
- Frame front left
- Frame front right
- Frame front triangle
Tub #
Printed parts required in this step
- Floor part 1
- Floor part 2
- Side wall part 1
- Side wall part 2
- Side wall part 3
- Side wall part 4
Tub to Frame assembly #
Fenders and Brake lights #
Printed parts required in this step
- 2x Fender
- 2x Tail light back
- 2x Tail light blackout
- 2x Tail light lens
Axle #
Printed parts required in this step
- Axle housing
- Axle Wheel Shaft
- 2x Shackle
Wheels and tires #
Printed parts required in this step
- 2x RC Original Rear Wheel back
- 2x RC Original Wheel front
Trailer Hook #
Printed parts required in this step
- Trailer Hook Base
- Trailer hook Cover
- Trailer hook end
- Trailer hook leg
- Trailer Hook
Willys MB Back Crossmember #
Printed parts required in this step
- Back Crossmember for mbt hook 1
- Back Crossmember for mbt hook 2
- Back Crossmember for mbt
You need to replace the original Back crossmember of the Willys MB with the new one so the trailer can hook on the Willys MB Jeep
Support #
If you like my builds, please consider buying me a coffee, it encourages me to continue making quality designs. Click on the coffee cup on the right bottom corner or visit the Show Your Support Page. Thank you, it is truly appreciated!
